BC BMZ - Bond Mizer
BCI's Bond Mizer BC BMZ Dispensing System is your
most economical choice to improve productivity, reduce waste and eliminate
operator fatigue. Dispense any viscosity fluid easily.
The Bond Mizer BC BMZ sets up in minutes and requires
only shop air to operate. Standard accessories include; 30cc adapter head
assembly, 30cc barrels, assorted disposable needles and syringe stand.
Simple On/Off operation of the pneumatic footswitch
provides welcome relief from tedious dispensing by hand.
BC ACG - Air Operated Cartridge Gun
Apply adhesives and sealants from caulk type tubes
clearly, easily with the touch of a trigger.
All metal grip assembly and cartridge barrel construction.
50-60 psi operating pressure.
Bond Master I - Dispense Control System
- Save material cost
- Save production time
- Save on equipment expense
- Measurable and repeatable operations.
Features
- Accurate, Repeatable dispensing of all fluid viscosities.
- Easy to use - Set up in minutes.
- Digital Timer - 00.1 thru 99.9 seconds.
- Output pressure adjustable to 100psi
- Adjustable vacuum prevents low viscosity fluids
from dripping between dispense shots.
- Complete system includes all you need to start improving
your fluid dispensing operations.
Specifications
- Output - 0-100psi
- Timer - Digital 0.1 thru 99.9 seconds
- Electrical Requirements - 115 Volts, 1 amp (220VAC
Available).
- Actuation - Footswitch
- Dimensions - 2 1/2" H x 9" W x 4 3/4"D
- Requires clean, unlubricated shop air.
BC HG - Dual Syringe Cartridge Dispensing
Hand Gun
Available for both pneumatic and
manual operations
Manufacturers are realizing higher productivity
and cost savings by selecting the easy-to-use and environmentally safe, handheld
adhesive dispensing systems. Using these systems reduces the amount of hazardous
and material waste that is generated and enhances employee productivity by
reducing preparation times. Ratio control is achieved since the integrated
system of dispen-ser, dual cartridge and static mixer ensures that the correct
amount of adhesive is dispensed from both side of the cartridge.
Allows Operator pick and place of small electronic
or mechanical parts kit includes wand with internal filter and set of eight
ESD safe pick needles with suction cups.
Optional
Accessories - Vacuum Pick up Wand kit
Filter Regulator
Clean shop air to prevent particles, oil and water
from entering dispenser and dispensed material.
Dual-cartridge
containers are filled to ensure that no air becomes trapped in the cartridge
and that the adhesive is properly metered. Cartridge are easily inserted into
the dispensing gun by operators.
Bonding Concepts, Inc. 450 Shepard
Drive, Suite 9, Elgin, IL 60123, USA.
Ph: 847-488-0123 | Fax: 847-488-0124 | Email: info@bondingconcepts.com
